The Barracuda is our energy efficient entry-level pump for applications requiring moderate head pressure and high flow rates. Ideal applications for this unit are 180-350 gallon tanks with sump return systems requiring a minimum of 10 feet static head. Using a 1/4 horsepower Baldor Motor manufactured in the USA. 3 year manufacturer warranty.
- Inline use only - NOT Submersible
- Max Head 18 feet
- Less than half the watt draw of comparable submersible pumps!
- Ports are 1.5 in. FNPT suction and 1.5 in. FNPT discharge.
- Units are pre-wired with an 8` cord and molded 115V plug.
- Housing is molded of PVC plastic for added efficiency.
- Quiet operation
- Rebuildable motors.
- Medium is 24" Diameter and Large is 32" Diameter.
- Use to easily dry flowers and herbs.
- Carabiner clip to make hanging simple.
- Durable polyester netting.
- Wire frames to make shelves rigid and sturdy.
- Easy to use, snap together buckles to quickly add or remove shelves.
- Medium is 24" Diameter and Large is 32" Diameter.
- Use to easily dry flowers and herbs.
- Carabiner clip to make hanging simple.
- Durable polyester netting.
- Wire frames to make shelves rigid and sturdy.
- Easy to use, snap together buckles to quickly add or remove shelves.
- Sold in case quantities only.
- Sold in case quantities only.
- Sold in case quantities only.
HI 9813-6N is a versatile, water resistant multiparameter portable meter specifically designed for agricultural applications such as hydroponics, greenhouses, farming and nurseries. It features an extra large LCD that clearly displays the parameter being measured as well as calibration instructions. Calibration is fast and easy with knobs located on the front panel of the instrument. HI 9813-6N is designed for simplicity of use in taking pH, mS/cm, ppm and temperature in the °C scale measurements. HI 9813-6 includes all the features of the HI 9813-5 while incorporating our exclusive CAL CHECK feature. CAL CHECK allows the user to easily check the probe calibration status at any time. Comes with the HI 1285 series pH/EC/TDS/temperature probe. This probe features a fiber junction and gel electrolyte making it ideal for fertilizer solutions.
The original DiST (Dissolved Solids Tester) was first introduced in 1986 by HANNA®. Since then, Conductivity and Total Dissolved Solids measurements have never been easier. DiST's ease-of-use, in combination with its affordability, made it the standard in EC and TDS measurement. HANNA® continues the tradition of innovation with the DiST 5. For this series, we have included all the features you have asked for and more! The DiST 5 6 includes features such as a replaceable graphite electrode, adjustable TDS ratio, temperature in °C or °F, automatic temperature compensation (ATC) with adjustable battery level indicator, stability indicator, automatic shut-off and automatic calibrating all in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC/TDS/Temperature measurements!
These state-of-the-art meters have been engineered with a host of features suited to the aggressive environments commonly found in agricultural applications; housings and cable connections have been sealed against vapor and humidity. With a 12 volt DC power supply included with the meter, low battery failures are never an issue. Locate the meter right above the sample to be monitored or take it with you for spot checking. Select HI 983301N for TDS measurements with the common 0.7 TDS conversion factor (4-4-2) or HI 983301N/5 which uses a 0.5 conversion factor.
Both the TDS and EC meters come with a probe specifically made for horticulture and hydroponics applications. The probe compensates for temperature variations automatically, is easy to clean and is very stable, needing little maintenance.
- Sold in case quantities only.
The 1413 µS/cm solution is the one best suited for general use. This solution is also available in combination kits with the pH 7 buffer for the easy calibration of multiparameter instruments.
The 1413 µS/cm solution is the one best suited for general use. This solution is also available in combination kits with the pH 7 buffer for the easy calibration of multiparameter instruments.
All pH 4 solutions show batch number, expiration date and the correlation table between pH and temperature.
pH 7.01 is the most widely used among all buffer solutions.
- Sold in case quantities only.
All pH 4 solutions show batch number, expiration date and the correlation table between pH and temperature.
pH 7.01 is the most widely used among all buffer solutions.
- Sold in case quantities only.
HI 981401N has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. The housing is water-resistant and features a molded eye which allows installation right above the sample to be monitored.
Measurements are highly accurate and can be verified with one or two point calibrations. With a 12 Volt DC power supply included with the meter, low battery failures are never an issue. The electrode is interchangeable and the connector is well-protected behind a waterproof sheathing. The meter is supplied with a stainless steel probe, preventing potential grounding problems and ensuring extended electrode life.
The gel-filled pH electrode has been specially designed to address the needs of growers. Its design guarantees greater clogging resistance in fertilizer solutions with high concentrations of phosphate, nitrate, etc.
Designed for continuous monitoring of pH, TDS and temperature, the HI 981504 is simple to install and can be placed above the sample to be tested. pH, TDS and temperature measurements are simultaneously displayed on three backlit LCDs which can be easily viewed at a distance - even in low light. This means no more switching between parameters.
The HI 1286 gel-filled pH electrode is provided with a waterproof sheath to protect the BNC connector. The unique design of the electrode provides longer life in aggressive solutions. The HI 7634 TDS probe is easy to clean and requires little maintenance. Measurements are accurate and the meter can be calibrated at one or two points for pH and at a single point for TDS. Temperature range is factory calibrated.
The Combo HI 991404 meter is designed for continuous, high accuracy pH, EC/TDS and temperature measurements. These microprocessor indicators continuously monitor the three most important nutrient parameters in hydroponics, greenhouses and horticultural applications with a single instrument. These indicators feature a large, dual-level, backlit LCD to give you instantaneous readings of pH, EC or TDS and temperature, even from a distance.
At startup, these indicators perform a self-check to assure proper working condition. HI 991404 stability indicator and hold features prompt the user when to take the reading and freezes the display for easy and accurate recording.
Calibration and temperature compensation is automatic, while the EC/TDS conversion factor and temperature coefficient (ß) are user adjustable for application-specific measurements.
These instruments are supplied with an advanced, non-clogging double junction pH electrode and a rugged conductivity probe that will withstand even the most aggressive environments. The instruments are powered by a 12 volt dc transformer and are easy to install and use.
Designed for continuous monitoring of pH, TDS and temperature, the HI 981504 is simple to install and can be placed above the sample to be tested. pH, TDS and temperature measurements are simultaneously displayed on three backlit LCDs which can be easily viewed at a distance - even in low light. This means no more switching between parameters.
The HI 1286 gel-filled pH electrode is provided with a waterproof sheath to protect the BNC connector. The unique design of the electrode provides longer life in aggressive solutions. The HI 7634 TDS probe is easy to clean and requires little maintenance. Measurements are accurate and the meter can be calibrated at one or two points for pH and at a single point for TDS. Temperature range is factory calibrated.
When HANNA® introduced its first version of the pHep (pH electronic paper) in 1986, it immediately revolutionized the standard in pH measurement. pHep's ease-of-use in combination with its affordability made it possible for non-technical and technical personnel alike to measure pH on the spot, accurately and inexpensively throughout a variety of industries. Since its introduction, over 1 million pHeps have gone to satisfied customers around the world.
We at HANNA® have always valued the comments and suggestions coming from our customers. For this series, we have included all of the features you have asked for and more! The pHep 4 and pHep 5 include features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, instability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.
The HI 98107 (pHep®), which is the result of over two decades of research and manufacturing experience, is the updated version of our widely popular 96107 (pHep®). Today the redesigned pHep series feature a rugged and ergonomically enhanced casing that fits comfortably in your hand and a larger LCD which makes it easier to read at any angle. With the latest innovation of a non-clogging fiber junction the new pHep meters last much longer. Simply pull out 1-2 mm (1/8") of the junction fiber to completely renew the junction.
The pHep® offers a Range of 0.0 to 14.0 pH and an Accuracy of ±0.1 pH. This tester is calibrated manually to 2 points.
The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes.
When HANNA® introduced its first version of the pHep (pH electronic paper) in 1986, it immediately revolutionized the standard in pH measurement. pHep's ease-of-use in combination with its affordability made it possible for non-technical and technical personnel alike to measure pH on the spot, accurately and inexpensively throughout a variety of industries. Since its introduction, over 1 million pHeps have gone to satisfied customers around the world.
We at HANNA® have always valued the comments and suggestions coming from our customers. For this series, we have included all of the features you have asked for and more! The pHep 4 and pHep 5 include features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, instability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.
The Combo HI 991404 meter is designed for continuous, high accuracy pH, EC/TDS and temperature measurements. These microprocessor indicators continuously monitor the three most important nutrient parameters in hydroponics, greenhouses and horticultural applications with a single instrument. These indicators feature a large, dual-level, backlit LCD to give you instantaneous readings of pH, EC or TDS and temperature, even from a distance.
At startup, these indicators perform a self-check to assure proper working condition. HI 991404 stability indicator and hold features prompt the user when to take the reading and freezes the display for easy and accurate recording.
Calibration and temperature compensation is automatic, while the EC/TDS conversion factor and temperature coefficient (ß) are user adjustable for application-specific measurements.
These instruments are supplied with an advanced, non-clogging double junction pH electrode and a rugged conductivity probe that will withstand even the most aggressive environments. The instruments are powered by a 12 volt dc transformer and are easy to install and use.
HI 9813-0 allows you to measure pH, EC (conductivity) and TDS with just one instrument! This meter has a full-spectrum pH measurement range.
The EC range goes to 4.00 mS/cm. In the TDS range, both instruments use a conversion factor from 0.56 to 0.72 for fertilizer readings, to ensure your measurements fully conform to industry standards.
The specially engineered HI 1285-0 probe is interchangeable and the pH electrode utilizes a fiber junction and gel electrolyte which are particularly suitable when used in fertilizer solutions.
HI 9813-0 and HI 9813-5 measure TDS in the 0 to 1999 ppm range.
HI 9813-5 also performs temperature measurements, with the special probe HI 1285-5.
The original DiST (Dissolved Solids Tester) was first introduced in 1986 by HANNA®. Since then, Conductivity and Total Dissolved Solids measurements have never been easier. DiST's ease-of-use, in combination with its affordability, made it the standard in EC and TDS measurement. HANNA® continues the tradition of innovation with the DiST 5. For this series, we have included all the features you have asked for and more! The DiST 5 6 includes features such as a replaceable graphite electrode, adjustable TDS ratio, temperature in °C or °F, automatic temperature compensation (ATC) with adjustable battery level indicator, stability indicator, automatic shut-off and automatic calibrating all in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC/TDS/Temperature measurements!
The HI 98129 Combo waterproof tester offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. The waterproof Combo (it even floats) has a large easy-to-read, dual-level LCD and automatic shut-off. pH and EC/TDS readings are automatically compensated for the effects of temperature (ATC). This technologically advanced tester has a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode that resists contamination by salts and other substances. This gives these meters a greatly extended life. Your tester no longer needs to be thrown away when the pH sensor is exhausted.
The EC/TDS conversion factor is user selectable as is the temperature compensation coefficient (ß). Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester brings you all the features you've asked for and more!
- Contact a dealer for exact pricing in your area.
NEW PRODUCTS (20)
Air Purification (25)
Carbon Filters (70)
Aqua Pump Chillers Heaters (18)
Bonsai Hero Trimmers (5)
Electronic Ballasts (13)
Environmental Control (84)
Extraction Supplies (18)
Fluorescent Lighting (42)
Grow Tents (13)
Growing Accessories (78)
Growing Media (59)
House & Garden Products (13)
Lamps (31)
Leaf Shines Washes (24)
Light Movers Hangers (34)
Lighting Components (69)
Lighting Controllers (12)
Mite Killer (1)
Nutrients and Supplements (909)
Organics (1)
Pest and Disease Control (98)
PH/EC/TDS Meters and Solutions
Pots and Containers (29)
Propagation (97)
Pumps and Irrigation Supplies
Reflective and BW Films (27)
Reflectors & Hoods (19)
ROTOGRO (1)
SMELL PROOF ITEMS (5)
Sprayers and Wands (25)
Timers and Instruments (16)
Trays Reservoirs Grow Systems (3)
Ventilation AC Heating (69)
Water Purification & Accessories (64)
Weather Stations (3)
